To get real-time FAQ updates, and the latest information on ClarkDietrich, follow us on Twitter.
Yes, ClarkDietrich recommends that all butt joints, intersections, ends, and corners be caulked and sealed with a high-performance sealant. The installer should follow recommendations provided by the sealant manufacturer. Miter joints may be desired and should be discussed with the construction team prior to installation.
Yes, all Vinyl products are produced in Miami, FL and all our PVC is purchased from domestic suppliers. Documentation may be requested and provided through www.clarkdietrich.com.
No, all ClarkDietrich products are asbestos free. MSDS sheets are available upon request.
Yes, all Vinyl exterior grade products are resistant to UV light. This means they will not degrade/yellow/fade in direct sunlight. The compounds used are designed for exterior conditions, much like those used in vinyl windows.
Yes, ClarkDietrich manufactures exterior trims from PVC with compounds using Titanium Dioxide (TiO2) that resists UV radiation. All ClarkDietrich exterior products are formulated and manufactured to meet ASTM D4216.
ASTM C1063, Sec. 6.6.2, Table 1 permits use of PVC, with this direction: "The selection of an appropriate type of material for accessories shall be determined by applicable surrounding climatic and environmental conditions specific to the project location, such as salt air, industrial pollution, high moisture, or humidity."
Yes, all vinyl products are manufactured from lead free PVC compounds.
Yes, our products have excellent adhesion properties, and no priming is required. We suggest consulting with the paint manufacturer as to the surface to be painted. 1 – 2 coats are recommended to cover well.
ClarkDietrich can also integrally color the PVC component; and carry stock colors tan, brown, gray and black. Call to discuss these color optioins with ClarkDietrich Customer Service at 1-800-648-4695.
Ignition Resistance: Rigid vinyl is self-extinguishing, and will not continue to support combustion once flame source is removed; therefore it will not cause a fire to restart or spread. It offers better resistance to burning than many other common building materials.
No, PVC products are not compatible with the rubberized asphalt or butyl adhesives. They should not be applied directly to the PVC trims without the use of a barrier, or separation layer.
No, PVC vent products are not required to hold an FBC or Miami-Dade approval number because these products are specified in the 2010 Florida Building Code. Since these products are directly specified and comply with ASTM standards, additional approval is not required.
Yes. ClarkDietrich personnel can assist you with cross-referencing to other vinyl components. Furthermore, ClarkDietrich may be able to modify existing components, or will investigate creating a brand new, unique vinyl component for your application. Contact ClarkDietrich Customer Serivce at 1-800-648-4695.